You may think that anything dealing with HVAC is complicated. This is due to the fact that a lot will go into these things.
Know what type of system you currently have before calling someone to fix it. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. This will help you give the new contractor the necessary information.
Know what work you need before you hire a contractor. A contractor will be hard pressed to provide you an accurate price without accurate information about your system. It will be more hard if you can’t figure out what they need to do.
Clean your fan and coils come spring. Clean the outside of your external condenser unit.
It is important to have some knowledge of your present system and needs before calling a contractor. A contractor will not be able to give you an accurate price without accurate information about your system. It’s even harder if you’re not able to explain what you’ve done. Learn this information to start with.
Clean the debris off your outdoor condenser units. You don’t know when things are going to pile up, like right after it’s windy or rains, and that can throw a wrench in your system. It can cause a disaster with your system to malfunction by overheating.
Turn the power off first so nothing moves.Next, pop the grill off, pull out the blades and start cleaning them and the unit itself off gently.
Each spring, try cleaning the fan blades and coils on the condenser fan. First, turn the power off so nothing moves when you’re working with it. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
Your outdoor HVAC units might suffer when your trees begin dropping their leaves. Make sure you clean out your fan grill is cleaned often during the fall. The fan needs to have an unobstructed path for air to enter the unit, and if it gets blocked, then your system could suffer.
10 Drops
As the trees around your home lose leaves, it can cause your HVAC unit trouble. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. If your fan is obstructed, it can keep your system from working properly.
Lubricate your fan condenser once each year. These ports are often covered by a rubber or metal caps. Use a lightweight, and put 10 drops or fewer in each port, putting 10 drops in each port.
Put outdoor units in the shade.
Make sure you have your HVAC system checked at least twice a year. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. Although there might not be any noticeable issues, it is important to provide regular upkeep to prevent bad things from happening.
Have the HVAC serviced at the least. This should happen in the fall and malfunctions.
Turn off your outdoor condenser units when it becomes cold out.This means that you should be done when the temperature drops below 60ºF to avoid damage.This can keep your unit is working for years without the cost of repairs.
Have a smart thermostat installed. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Some programmable thermostats can even be controlled from a PC or other device.
During the service check, the serviceman will inspect the unit’s motor, oil the moving parts and check the freon levels in the system. These simple things are going to allow your system to run its best.
Never let your home reach a dangerously hot inside. Air conditioners really can only cool a home down a home by 20 degrees. If your house’s interior temperature hits 100 degrees Fahrenheit, then you will only be able to reasonably cool to around 80. This won’t be a safe and comfortable temperature for you to sleep in.
If nobody is home, turn off the AC. By raising the temperature from, for example 78 to 80, your house will be warmer, but only up to 80 before your AC kicks in. If you decide to set the temperature to 82 or 83 or so on, your AC won’t go on until it reaches that temperature. However, leaving it on increases your electric bill and wear and tear on the system.
Understanding how to work with the HVAC unit should be more apparent to you know. It’s really hard to get started with it unless you get motivated, so be sure that you take these things into account before you get started. You won’t be sorry you did, especially when it clicks in your mind!