You may feel like it’s not possible to learn anything about HVAC. If you review the information in this article, it’s not that hard. This advice should help you with all of the novice when it comes to simple repairs on your HVAC system.
Before you choose an HVAC contractor, have an idea in your mind of what needs to be done. This will make the quote process much easier. If you are unable to explain the work that needs to be taken care of, the conversation will be even less fruitful. It’s a good idea to learn this information in advance.
Know the name and type of system before looking for a repair person. This will enable you give the new contractor any information they might need.
If your HVAC doesn’t seem to be working properly, take a tour of the house prior to calling a professional. This will help the repairman determine where the problem is.
Lubricate your fan condenser at least once a year. You’ll find these ports are covered with a metal or rubber cap. Use a lightweight, detergent-free SAE 20 oil, putting 10 drops in each port.
Clean your condenser’s fan blades and coils prior to summertime. Clean the outside of your condenser unit.
Clean the debris on your condenser unit. You never know when things can pile up, like right after it’s windy or rains, and that can ruin your system. It could overheat and cause your unit.
Service your HVAC yearly. The service will include motor inspection, oiling of moving parts, and a freon level check. Small problems can occur in any of these areas and lead to serious issues if ignored for too long.
Turn the power off so you don’t get hurt or break something. Next, pop off the grill, put the blades out and start to gently clean them along with the unit.
Your outdoor HVAC unit may suffer when trees start to lose their leaves. Make sure the unit’s fan grill is cleaned frequently when the fall. The fan needs unobstructed air flow, and if it gets blocked, you will have to contend with problems.
Avoid allowing your home to ever get exceedingly hot. Air conditioners only cool down a home by 20 degrees. If you have your home at above 100 degrees then you can only get it to about 80 or above. This can still be way too warm for you.
Put outdoor unit in the shade if you are installing them.
Have the HVAC system inspected twice a year. This should happen in the fall and again in the spring.
Always check to see how long a company or contractor has been working for. Obviously, a company with a longer history and a positive reputation is the better choice. You will be taking a risk if you hire a newer contractor.
During this service visit, they will inspect the motor of the system, oil the different moving parts as well as check the system’s freon levels. These few simple things are going to allow your system to run at its best.
Degrees Fahrenheit
Check out your ductwork for leaks if your whole home isn’t being cooled or heated. You can call in your local utility company to do the testing for you, often for free or at a lower cost than a contractor. The testing will pay for itself once you find and repair the leaks.
Never let your home reach a dangerously hot inside. Air conditioners can cool a home down about 20 degrees Fahrenheit within a reasonable amount of time. If your home gets above 100 degrees Fahrenheit, you will only be able to cool it down to 80. This is not a healthy environment to live in.
Air conditioners tend to ice up.The drain line may also freeze over.If this is something you notice, disable the compressor by turning your thermostat to the fan only setting. If this doesn’t work, call in help.
If you hear clicking inside your HVAC unit, look for an obstruction. Often the issue is some sort of debris that’s hitting the fans in the cooling system. Just pull it out and clean the blade off. Look at the system before you call for help.
If you have an interest in HVAC, that information should have been quite valuable. With this advice, and you will be ahead of the game. Take these tips to heart, and you should be able to handle whatever comes your way with your HVAC unit.