This article will help you understand everything about the great tips you’ve been looking for.
Before contacting a repair service, do a short tour of the entire home. Make a list of the rooms which are comfortable and which just aren’t. Taking this step aids a contractor in figuring out what the problem is and how to repair it as quickly as possible.
Know the name and type of system before looking for a repair person. This information will facilitate the process when your contractor you hire to repair it.
Clean the debris off your outdoor condenser units. Debris can pile up at rates that increase during rainy or windy weather, bringing potential damage with it. It could overheat and cause your unit.
Be sure to clean the fan blades and coils of the condenser fan. Be sure to turn the power off first; you don’t want anything to move. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Turn the power off first so you don’t get hurt or break something. Next, pop off the grill, put the blades out and start to gently clean them along with the unit.
Your HVAC units might suffer when your trees start to lose leaves. Make sure the unit’s fan grill is cleaned often during the fall. The fan must be unobstructed to work properly, and if it gets blocked, you will have to contend with problems.
A big mistake that people make is cutting the grass next to the outdoor condenser unit and allowing all of the clippings to blow inside the fan and coil. Direct the grass clippings in a direction away from the HVAC unit. This includes grass clippings and leaves.
Put your outdoor condensers in places with shade.
Have the HVAC system inspected twice a year. This should be checked often for debris and again in the spring.
If you can choose the place where your outdoor compressor goes, pick a spot with lots of shade. When your unit is bringing in cool air, it will not have to work as hard to cool the air as it moves it inside, boosting efficiency.
Turn off any outdoor condensers you have when it’s getting cold. This means that you should be done when the weather falls under 60 degrees Farenheit. This can keep your HVAC running efficiently for many years to come.
It is always a good idea to swap out single pane windows with ones that have double panes. This same effect also keeps warm air during the colder months.
Boost energy efficiency by putting your condenser unit in the shade. As your air conditioner sucks in cool air, little will have to be done to cool it any further, saving you a ton on your energy bills.
A programmable thermostat can help you save money on your air conditioning costs. Some can even be controlled from a PC or other device.
During the service check, professionals can help by inspecting the system’s motor, oil the different moving parts as well as check the system’s freon levels. These simple things are going to allow your system running at peak performance.
When colder weather arrives, switch off all outdoor condenser units. To avoid damage, units should be turned off when temperatures are below 60 degrees. This will allow your system to work well every year, and that saves you quite a bit on making repairs.
Fan Setting
Air conditioners tend to ice up.The drain line may also freeze over. If you see this happen, immediately put your thermostat on the fan setting to turn off your compressor. You can call a HVAC professional, even if switching it to its fan setting starts making the ice melt.
One way to save some money with A/C is by having a programmable thermostat installed. It may save you as much as 10 percent of your overall utility bill if you turn your thermostat down by 10-15 degrees for a portion of the day. Also, you can find a thermostat that is controllable from a computer or smart phone.
Look for calculators online to truly understand what size of unit is necessary for your home. Look in the manual to determine the manufacturer website for this information.
Ask friends and relations for their HVAC contractor recommendations. People that have had great service are usually more than willing to share this information. It’s also a good way to learn the names of contractors you should not be contracted for work.
Try to have your HVAC system looked at every year, because regular maintenance will go a long way in energy efficiency. This inspection will ensure that your unit is working efficiently, including a freon level and motor check, and oiling moving parts. This ensures your system runs smoothly.
There are quite a lot of sites now that let customers to share their experiences with contractors. This works both in finding those you want to hire and also with and those that you don’t want to work with.
Are you looking at purchasing a new heating/cooling system? You will need to know some things into account. Systems have ratings according to the total area they can effectively heat or cool. You are better off purchasing a bigger unit rather than purchasing one that is a bit too small.
Consider how long a given HVAC company has been in existence before giving them your business. Firms that have been in business for a long time are easier to assess. Hiring a new company will be riskier.
Replace the air filter to keep your HVAC system every month. This is the easiest step to take to ensure that you can do to keep your unit running in tip top shape.
If you have no choice but to put it in the corner, buy one that lets the air flow to be redirected so that it is not flowing towards the wall.
Ask friends and family for contractor recommendations. Anyone that has previously needed work done on their HVAC unit are more than happy to tell you their experiences. This can also help you learn the names of those companies that you should avoid.
Anyone can install and properly use an HVAC system. It is worth the investment of your time. Use these suggestions as you need.